2016 Mx5 Springs, final version

image
user avatar
CorkSport - Derrick
//elite
posts: 325
joined: 10/01/13 @ 17:02

2016 Mx5 Springs, final version

postby CorkSport - Derrick » 10/05/15 @ 12:36

Here is the final version we will be offering for the ND

image

What do you guys think on the look/stance?

-Derrick
user avatar
phillyb™
//banned
posts: 5567
joined: 10/01/13 @ 16:06
contact:

Re: 2016 Mx5 Springs, final version

postby phillyb™ » 10/05/15 @ 12:43

looks good.
in before n0t slammz
don't get caught
user avatar
CorkSport - Derrick
//elite
posts: 325
joined: 10/01/13 @ 17:02

Re: 2016 Mx5 Springs, final version

postby CorkSport - Derrick » 10/05/15 @ 12:50

The car rides really well with the spring setup. There is a slight rake while static but when you drop people in it it is level.

I think you are going to see some companies getting saggy butt by trying to keep the spring level even with no weight in the car.

-Derrick
user avatar
CorkSport - Derrick
//elite
posts: 325
joined: 10/01/13 @ 17:02

Re: 2016 Mx5 Springs, final version

postby CorkSport - Derrick » 10/19/15 @ 15:54

We are looking at a release date of November 4th :tits:
user avatar
phillyb™
//banned
posts: 5567
joined: 10/01/13 @ 16:06
contact:

Re: 2016 Mx5 Springs, final version

postby phillyb™ » 10/20/15 @ 10:23

nice. that's right around the corner.
don't get caught
user avatar
CorkSport - Derrick
//elite
posts: 325
joined: 10/01/13 @ 17:02

Re: 2016 Mx5 Springs, final version

postby CorkSport - Derrick » 10/29/15 @ 12:33

Here is the spring data for our springs. The OEM spec are from the non club models, our launch edition.

OEM Specs:
Rate Front 2.40 Kg/mm
Rate Rear 1.20 Kg/mm
Height Front: 665mm
Height Rear: 667mm
CS Specs:
Rate Front 2.70 Kg/mm (13% Increase)
Rate Rear 1.90 Kg/mm (58% Increase)
Height Front: 624mm (41mm drop)
Height Rear: 640mm (27mm drop)

Looking at the data some people may ask why did we not take the rear down as low. The answer is when you are in the Mx5 with two passengers we did not want the Mx5 to have a saggy butt look so we set the static height a little higher. The car sitting with no load and 1/2 tank of gas is below.

image

I will get the link for the springs posted up next week when we have the listing live on our webpage.

-Derrick
user avatar
phillyb™
//banned
posts: 5567
joined: 10/01/13 @ 16:06
contact:

Re: 2016 Mx5 Springs, final version

postby phillyb™ » 10/29/15 @ 14:08

looks good.
don't get caught
user avatar
Teejay187
site admin
posts: 1321553
joined: 10/01/13 @ 14:08
location: Oslo, Norway

Re: 2016 Mx5 Springs, final version

postby Teejay187 » 11/02/15 @ 17:47

Damn, that looks mint! I'd buy one in a heart beat!
99' Miata
user avatar
CorkSport - Derrick
//elite
posts: 325
joined: 10/01/13 @ 17:02

Re: 2016 Mx5 Springs, final version

postby CorkSport - Derrick » 11/05/15 @ 14:06

Our lowering springs are available for purchase. The picture below demonstrates what I mentioned about the rake in the Mx5 unloaded vs loaded. You can use the line edge behind the car to see the height difference on the rear.

image

We have the springs available meow for $219.99 and we are offering the springs with free (slow) shipping to the 48 states.

Link for the springs.

-Derrick

return to “corksport”

who is online

users browsing this phorum: no registered users and 1 guest