Vacuum block

models will be moved to their right category when finished.
user avatar
Teejay187
site admin
posts: 1321547
joined: 10/01/13 @ 14:08
location: Oslo, Norway

Vacuum block

postby Teejay187 » 12/12/15 @ 17:07

So I hate buying stuff that I can make myself.

Therefore I am creating a vacuum block with the needed in/outputs for the ITB setup.

Thinking about using M8 to 8mm barbed fittings the the runners, M8 to 10mm for the brake booster, and M6/M8 to 5mm for the Megasquirt MAP sensor.
99' Miata
user avatar
phillyb™
//banned
posts: 5560
joined: 10/01/13 @ 16:06
contact:

Re: Vacuum block

postby phillyb™ » 12/12/15 @ 17:27

fuck yeah!
don't get caught
user avatar
theAngryMarmot
//elite
posts: 452
joined: 10/15/13 @ 20:16

Re: Vacuum block

postby theAngryMarmot » 12/12/15 @ 22:22

I used a air compressor distribution block that was $7 on Amazon.
user avatar
Teejay187
site admin
posts: 1321547
joined: 10/01/13 @ 14:08
location: Oslo, Norway

Re: Vacuum block

postby Teejay187 » 12/13/15 @ 17:48

theAngryMarmot wrote:I used a air compressor distribution block that was $7 on Amazon.


Thats a good idea. However, things like that are actually pretty expensive here.

First revision:

image
99' Miata
user avatar
GeorgeG5
//elite
posts: 672
joined: 10/02/13 @ 00:13
location: third world
contact:

Re: Vacuum block

postby GeorgeG5 » 12/14/15 @ 09:12

you want to make the side ports bigger to accommodate for the brake booster line
user avatar
Teejay187
site admin
posts: 1321547
joined: 10/01/13 @ 14:08
location: Oslo, Norway

Re: Vacuum block

postby Teejay187 » 12/15/15 @ 08:48

These are already M8, M8 :phillyb™:
99' Miata
user avatar
GeorgeG5
//elite
posts: 672
joined: 10/02/13 @ 00:13
location: third world
contact:

Re: Vacuum block

postby GeorgeG5 » 12/17/15 @ 15:47

allright then, buddy :tits:
user avatar
Teejay187
site admin
posts: 1321547
joined: 10/01/13 @ 14:08
location: Oslo, Norway

Re: Vacuum block

postby Teejay187 » 12/27/15 @ 08:32

Well, yes, lad
99' Miata
user avatar
Teejay187
site admin
posts: 1321547
joined: 10/01/13 @ 14:08
location: Oslo, Norway

Re: Vacuum block

postby Teejay187 » 03/07/16 @ 06:11

Revised version. meow I only gotta do the print!

image
99' Miata
user avatar
phillyb™
//banned
posts: 5560
joined: 10/01/13 @ 16:06
contact:

Re: Vacuum block

postby phillyb™ » 03/07/16 @ 14:08

+1
don't get caught
user avatar
Teejay187
site admin
posts: 1321547
joined: 10/01/13 @ 14:08
location: Oslo, Norway

Re: Vacuum block

postby Teejay187 » 03/12/16 @ 21:32

Started using new modeling software. Can get some decent shots of the parts meow lol..

image
image
99' Miata

return to “ongoing projects”

who is online

users browsing this phorum: no registered users and 1 guest