NB Cold Air Intake.

blocking plates, intakes, and mistakes
user avatar
Teejay187
site admin
posts: 1321538
joined: 10/01/13 @ 14:08
location: Oslo, Norway

NB Cold Air Intake.

postby Teejay187 » 05/15/17 @ 06:01

Prototyping a new intake for the NB. It will make a swift 180 out from the TB, and continue alongside the intake towards the firewall.

image
99' Miata
user avatar
Teejay187
site admin
posts: 1321538
joined: 10/01/13 @ 14:08
location: Oslo, Norway

Re: NB Cold Air Intake.

postby Teejay187 » 05/15/17 @ 16:37

The Miata NB Cold Air Intake is meow in revision 14. It is meow ready for the first prototype. Maybe the first 3D printed intake for the NB?

image
99' Miata
user avatar
Teejay187
site admin
posts: 1321538
joined: 10/01/13 @ 14:08
location: Oslo, Norway

Re: NB Cold Air Intake.

postby Teejay187 » 05/19/17 @ 06:41

Printed the first prototype of the intake over the last few days. Had no issues printing it, but I had to cut it up in 7 parts to be able to print it without issues. I'll do a test fit today if the weather holds up.

image

Tags: Miata MX5 NB CAI Cold Air Intake 3D 3DPrint DIY
99' Miata
user avatar
Teejay187
site admin
posts: 1321538
joined: 10/01/13 @ 14:08
location: Oslo, Norway

Re: NB Cold Air Intake.

postby Teejay187 » 05/22/17 @ 04:20

Had to print a new prototype as the other one one had some pretty obvious flaws.

New one is a bit longer and has some added angles to keep it alongside the intake manifold.

Fitment was really good, but I have to shorten it about 4cm to make room for my philter. Up next is marking oil breather bung and IAT bung location, as well as a way to fix the intake to the manifold.

I will from meow on name this the "Saxophone Cold Air Intake" or SCAI for short.

image
image
99' Miata

return to “engine”

who is online

users browsing this phorum: no registered users and 1 guest